EasyLife™ X
EasyLife™ X integrated lifetime system including: comprehensive easy to use time resolved software package with unique Lifetime Kinetics acquisition mode, sample compartment with 10 mm thermostatable cuvette holder, patented strobe detection (185 nm to 680 nm), and electronics. One can easily measure lifetimes from 100 ps to 4 μs. Please select appropriate nano-LED excitation sources (not included). Each LED is easily interchanged with a simple snap in/out mechanism. Emission wavelength selection is by means of filters (not included). QuickStart video is included. Workstation required, but not included.
Select Filters
Bandpass FIlters
Other Filters
504
Longpass Filters
Set of (8) 1" round Longpass filters covering the wavelength range from 295–455 nm. Cut-off wavelengths are: 295, 305, 320, 380, 400, 420, 435 and 455 nm. The set is suitable for light sources from 280 to 435 nm and fluorophores emitting at wavelengths above 300 nm.
505
Longpass Filters
Set of (8) 1" round Longpass filters covering the wavelength range from 475–610 nm. Cut-off wavelengths are: 475, 495, 515, 530, 550, 570, 590 and 610 nm. The set is suitable for light sources from 280 to 580 nm and fluorophores emitting at wavelengths above 480 nm.
506
Longpass Filters
Set of (8) 1" round Longpass filters covering wavelength range from 630–1000 nm. Cut-off wavelengths are: 630, 665, 695, 715, 780, 830, 850 and 1000 nm. The set is suitable for light sources from 280 to 670 nm and fluorophores emitting at wavelengths above 650 nm.
508
Neutral Density Filter
Set for 300–2000 nm, +/- 5 % tolerance nominal. Includes: 0.1, 0.3, 0.5, 1.0, 2.0 and 3.0.
507
Filter Holder
Additional 1" diameter filter holder.
Select Options
Options must be ordered at time of original purchase.
They cannot be added to the system later.
503
Solid Sample Holder
511
Stir Provision for Cuvette
515
Extended wavelength PMT
A specially selected extended wavelength PMT tube for wavelength range from 185 to 900 nm
560
Peltier Cuvette Holder
Replace standard cuvette holder with Peltier cuvette holder for software controlled temperature adjustment from -20 to 105 degrees celsius. Includes micro-stirrer and water bath.
Select Accessories
513
Replacement PMT Tube
185 nm to 680 nm
514
Replacement PMT Tube
185 nm to 900 nm
517
Front Face Solid Sample Holder
The front face solid sample holder, capable of rotational trace was designed for the measurement of solid compounds, microscope slides, or films. The solid sample holder is easily interchangeable for a powder sample holder head.
557
Powder Sample Holder Head
Must purchase a front face sample holder (#517)
558
Powdered Sample Holder Windows
Six pack of windows for the powdered sample holder
500
Sheet Polarizer
One sheet polarizer with mounting hardware. Sheet polarizers have great acceptance angle, good throughput and are usable for wavelengths above 350 nm. Two required.
501
"Magic Angle" Polarizer
502
Cold Finger Dewar
Designed to be used with liquid nitrogen as coolant (77 K). Includes: quartz cold finger Dewar that accepts 5 mm tubes, Dewar holder for the sample turret or single cuvette holder, foam lid for the Dewar and extension collar with altered sample chamber lid. Features a Suprasil quartz cold finger that passes light down to about 200 nm.
509
10 mm Quartz Cuvette
510
Semi-Micro Cuvette
With insert.
512
Portable Work Station
Recommended to guarantee software compatibility.